![]() Available in a variety of sizes to adapt to different processes- from a luer fitting to 3/4inch hosebarb.Within the instrument, the measured resistance is converted to the temperature. No calibration is required because the temperature versus resistance for the thermistor element is well-defined within the specified accuracy range and is verified during manufacturing. The temperature sensing element is a thermistor. A disposable dip probe is also available to measure temperature within a vessel. The luer fitting can be connected to a variety of fittings that can securely adapt to tubing or other devices. Tubing can be secured directly to the hose barb fitting and the hose barb design imparts no obstruction on the fluid path that can cause a pressure drop and there is no dead-leg at the point where the temperature is measured. To optimally adapt to tubing, the sensors are available with either a hose barb fitting or a luer fitting. They are the perfect solution for use with tubing measurement applications. For laboratory use, there is a benchtop transmitter that can connect to data acquistion systems. Also, a 4-20mA stand-alone transmitter is available. ![]() ![]() Suitable monitors include the handheld unit TEMP340, the PendoTECH Process Control System, or other pre-qualified third party monitors. These sensors connect to monitors via a reusable cable. They are perfect for bioreactor, filtration and chromatography processes, filling operations, and general process monitoring. They are low cost for single use applications and may be repeatedly cleaned and re-used. PendoTECH Single Use Temperature Sensors™ measure temperature in your processes accurately and cost effectively.
0 Comments
Leave a Reply. |